FOSHAN ZCHONE PACK MACHINERY CO.，LTD
Foshan Zhengchang Machinery Equipment Co .,Ltd.
Add to Cart
Main Parameters
| Production capacity: | 30-50 cans/min |
| Can sealing height: | 60-200mm |
| Applicable bottle diameter: | 50-120mm |
| Operating power: | AC220V 50/60Hz |
| Total Power: | 0.65KW |
| Weight: | 250KG |
| Dimension: | 2000*1000*1800mm |
The automatic dust capping machine is mainly suitable for the sealing of round and square dustproof plastic caps of various PET plastics, iron, aluminum, and paper cans. The product has advanced design, reasonable structure and simple operation. , is the necessary ideal packaging equipment for food, medical, tea and chemical industries.
The main body of the automatic dust-proof capping machine is made of stainless steel, which is durable and anti-corrosion. When using a fully automatic dust capping machine to cap caps of different diameters, it is only necessary to adjust the entertainment width by adjusting the hand wheel. For caps of different heights, we can also adjust the capping machine's adjustment hand wheel.
Structural performance description:
1. Use a pneumatic suction nozzle to suck the plastic cover in the cover slot into the snap cover slot;
2. Bring the cans to the entrainment place through the movement of the conveyor belt;
3. The entrainment drives the movement of the jar to bring out the lid of the outlet and is pressed by the capping wheel;
4. The width of the entrainment can be adjusted by adjusting the handwheel for lid glands of different diameters, which only takes 5 minutes;
5. It only takes 5 minutes to adjust the height of the capping wheel by adjusting the handwheel for lid glands of different heights;
Precautions
1. Installation location: horizontal, no vibration
2. The equipment shell must be connected to a safe and reliable protective ground wire;
3. Keep away or shield larger interference;
4. No impact or heavy pressure;
5. Before and after operation, check whether the screws of various parts of the machine are loose;
6. The power supply of the machine must be cut off when repairing and cleaning the machine;
7. When the electrical part fails, it is forbidden for non-electronic engineering technicians to repair it;
8. When the machine is running, it is forbidden to place all parts of the human body close to the rotating positions of the machine;
9. When using an air compressor, the air source must be stable, not less than 0.5Mpa, and a dryer must be used to ensure that the air source entering the cylinder remains dry and provides service life;